HYDRAULIC HAMMERS - Used
The WT Grupa offers, in addition to new hammers, used hydraulic hammers.
The WT grupa does NOT buy used hammers on a "seen-bought" basis, but hammers are purchased exclusively on an "trade in" basis. This means that all hammers, before purchase, are inspected in detail by the WT Grupa, their origin and current maintenance are known.
In addition, the hammers are completely overhauled in the WT Grupa workshop and are fully operational and ready for operation.
All used hammers have a WT Grupa warranty of min. 3 months.
| Model | Working weight, kg | Carrier weight, ton | Oil flow, l/min | Operating pressure, bar | Impact rate, bpm | Tool diameter, mm | Total tool length, mm | Impact energy, Joule |
|---|---|---|---|---|---|---|---|---|
| FURUKAWA HB20G | 1000 | |||||||
| Montabert BRH 125 | ||||||||
| JCB HM 1350 (RAMMER E 66) | 1330 | 16-26 | 100-170 | 135-145 | 360-650 | 115 | ||
| KRUPP HM 85 | 130 | 1,5-4,0 | 25-45 | 90-130 | 450-1150 | 62 | 640 | |
| ATLAS COPCO TEX 600 H | 960 | 12-19 | 55-120 | 100-140 | 640 | 105 | 900 | |
| FURUKAWA F 5 | 225 | 3-7 | 38-65 | 100-140 | 700-900 | 68 | 710 | |
| EPIROC ATLAS COPCO SB 302 | 300 | 4,5-9 | 50-80 | 100-150 | 600-1400 | 80 | ||
| ITALDEM GK 960 S | 1050 | 12-19 | 130-150 | 110-120 | 550 | 114 | 2300 | |
| STANLEY MB 550 | 325 | 3,2-7,2 | 60-80 | 135 | 800 | 70 | ||
| INDECO HB 8 | 415 | 4-10 | 50-85 | 105-130 | 80 | 830 | ||
| INDECO MES 621 | 400 | 4-9 | 70-95 | 110-120 | 500-950 | 80 | 720 | |
| HAMMER XL 300 | 300 | 4-10 | 45-95 | 60-75 | 400-900 | 80 | ||
| FURUKAWA F 19 | 1260 | 12-19 | 120-155 | 160-180 | 400-750 | 120 | 1180 | 3580 |
| ATLAS COPCO HB 2200 DUST | 2200 | 26-40 | 140-180 | 160-180 | 250-380 | 150 | 1300 |